7 Best Solder Sucker [2022]

Are you looking for Solder Sucker Reviews? Our experts found 49040 number of feedback online for "Solder Sucker" and shortlisted them. This suggestions is created for those looking for their ideal Solder Sucker. On selected products for the Best Solder Sucker you will see ratings. The rating matrix we have generated is based on user ratings found online. Take a look -

Best Solder Sucker
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack9.8Buy on Amazon
2Vampire Tools VT-001-SS World's Best Solder Sucker Compact and Durable Aluminum Body/Heat Resistance Silicone Nozzle+Spare Silicone Tube9.6Buy on Amazon
3KOTTO Solder Sucker, Vacuum Desoldering Pump9.6Buy on Amazon
4ENGINEER SS-02 Solder Sucker Desoldering Pump9.2Buy on Amazon
5Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components9.2Buy on Amazon
6MOGAOPI Solder Wick and Desoldering Pump9.2Buy on Amazon
7YIHUA 929D-V Electric Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering9Buy on Amazon
8Tabiger Solder Wick & Desoldering Pump9Buy on Amazon
9Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13" Solder Sucker Silicone Desoldering Tool (Blue)8.6Buy on Amazon
10Lesnow Solder Sucker Desoldering Pump8.6Buy on Amazon

Table Of Content:

1. Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack

  • Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck.
  • Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
  • Very sturdy,will worke good to remove existing solder from a circuit board
  • Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering.
  • A must have excellent solder sucker which fits nicely in your tool box

2. Vampire Tools VT-001-SS World’s Best Solder Sucker Compact and Durable Aluminum Body/Heat Resistance Silicone Nozzle+Spare Silicone Tube

  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal.
  • Compact design allows easy one-handed operation.
  • Withstands direct contact with soldering iron (350C Max).
  • Made in Japan with highest quality construction & components. High-powered.
  • Low maintenance cost, owing to spare tube, only required for replacement.

3. KOTTO Solder Sucker

  • STURDY] Made of high quality 6061 aircraft grade aluminum, and precision CNC machined.
  • CONVENIENT] The solder braid quickly absorbs molten solder and leaves a clean working area.
  • DURABLE] Quick and easy for solder residue clearance. Withstands direct contact with soldering iron.
  • EFFECTIVE] Powerful suction for solder removal. Internal spring produces strong suction.
  • Our US based customer service means that you can trust that if you’re not satisfied for any reason, you can get a hassle-free refund or replacement.

4. ENGINEER SS-02 Solder Sucker Desoldering Pump

  • Made in Japan
  • Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal).
  • Compact design allows easy one handed operation
  • Withstands direct contact with soldering iron (350C Max)
  • Highest quality construction & components used

5. Lesnow No-Clean solder wick braid with flux Super 10ft Length Wick Desoldering Braid Removal Tool Solder Sucker 1 piece Desoldering Wick Wire Roll and Disassemble Electrical Components

  • The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
  • 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.
  • This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
  • The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
  • The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.

6. MOGAOPI Solder Wick and Desoldering Pump

  • 4-in-1 Solder Removal Tool ) 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • One-handed solder sucker with powerful suction ) you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
  • Desoldering Wick with copper braid ) 1pcs solder braid with the size 2.
  • ABS body with non-slip sponge and Nylon nozzle desoldering pump ) The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • Widely used Solder Remover ) The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

7. YIHUA 929D-V Electric Desoldering Iron Solder Sucker Desoldering Pump with Shorter Charging Handle and Desoldering Nozzles 1.0mm 1.2mm for Through-Hole Desoldering

  • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions.
  • This is a plug-n-play desoldering iron.
  • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused.
  • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously.
  • Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase.

8. Tabiger Solder Wick & Desoldering Pump

  • One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and “vacuum” button, which make the sucking power awesome.
  • Desoldering Wick with copper braid】 2pcs solder braid with the size 2.
  • ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
  • 3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
  • Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

9. Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13″ Solder Sucker Silicone Desoldering Tool (Blue)

  • AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it right and left-handed, so everyone can use it easily.
  • HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use.
  • EASY TO USE You can use the desoldering wick pump just by Cocking the pump’s mechanism by pushing down on the table with your non-soldering hand.
  • DESIGN Designed in color blue and orange plastic, has anti-skid design so it is easy to hold and use.
  • SOLDER REMOVAL KIT The solder sucker can be used for both broad and small places, hard to reach areas, can be used to correct all mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.

10. Lesnow Solder Sucker Desoldering Pump

  • Wide range of uses:Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc.
  • Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient.
  • High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency.
  • Strong suction power: Solder sucker desoldering pump adopts stainless steel push rod, internal spring adopts back pull design, instant suction power is strong.
  • Press lightly and quickly rebound: Desoldering suction pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block.

Solder Sucker Buying Guide

Does the thought of finding a great Solder Sucker stress you out? Has your mind been juggling between choices when it comes to buying Solder Sucker in general, specifically regarding which model to choose?If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Solder Sucker for themselves. We understand the stress associated with the buying process!Since you’re here, you are obviously curious about Solder Sucker Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.But that’s not always easy, right? That's why we've taken time to compile a list of the best Solder Sucker in today's market, on your behalf, so that there will be no more worries for you.How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Solder Sucker currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Solder Sucker brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Solder Sucker based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Solder Sucker before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Solder Sucker they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Solder Sucker, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Solder Sucker before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Solder Sucker will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Solder Sucker if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Solder Sucker on the market, the products that got mostly negative ratings get filtered and discarded.
These are the criteria we have chosen our Solder Sucker on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Solder Sucker featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.